PRODUCTS
VR
  • Product Details
Features And Advantages:

1. The production line is compact in structure and occupies a small area.

2. Modular structure, which can be upgraded by adding equipment.

3. The installation is convenient, and the installation can be completed and put into production in a short time.

4. Reliable performance and easy to use.

5. The investment is small, which can quickly recover the cost and create profits.

Introduction

Simple dry mortar production line

The simple production line is suitable for the production of dry mortar, putty powder, plastering mortar, skim coat and other powder products. The whole set of equipment is simple and practical, with small footprint, low investment and low maintenance cost. It is an ideal choice for small dry mortar processing plants.



The Configuration Is As Follows

Screw conveyor

Screw conveyor is suitable for conveying of non-viscous materials such as dry powder, cement, etc. It is used to transport dry powder, cement, gypsum powder and other raw materials to the mixer of the production line, and transport the mixed products to the finished product hopper. The lower end of the screw conveyor provided by our company is equipped with a feeding hopper, and the workers put the raw materials into the hopper. The screw is made of alloy steel plate, and the thickness is corresponding to the different materials to be conveyed. Both ends of the conveyor shaft adopt a special sealing structure to reduce the impact of dust on the bearing.




Spiral ribbon mixer

Spiral ribbon mixer has simple structure, good mixing performance, low energy consumption, large load filling rate (generally 40%-70% of the mixer tank volume), convenient operation and maintenance, and is suitable for mixing two or three materials. In order to improve the mixing effect and shorten the mixing time, we designed an advanced three-layer ribbon structure; the cross-sectional area, spacing and clearance between the ribbon and mixer tank inner surface are designed according to different materials. In addition, according to different working conditions, the mixer discharge port can be equipped with manual butterfly valve or pneumatic butterfly valve.


Finished product hopper

The finished product hopper is a closed hopper made of alloy steel plates for storing mixed products. The top of the hopper is equipped with a feeding port, a breathing system and a dust collection device. The cone part of the hopper is equipped with a pneumatic vibrator and an arch breaking device to prevent the material from being blocked in the hopper.



Valve bag packing machine

According to the requirements of different customers, we can provide three different types of packing machine, impeller type, air blowing type and air floating type for your choice. The weighing module is the core part of the valve bag packing machine. The weighing sensor, weighing controller and electronic control components used in our packaging machine are all first-class brands, with large measuring range, high precision, sensitive feedback, and the weighing error could be ±0.2 %, can fully meet your requirements.



Control cabinet


The equipment listed above is the basic configuration of this type of production line. If you want to realize the function of automatic batching of raw materials, a batching weighing hopper can be added to the production line. If it is required to reduce dust in the workplace and improve the working environment of workers, a small pulse dust collector can be installed. In short, we can do different project designs and configurations according to your requirements.




User Feedback



User Case




Transport Delivery


CORINMAC has professional logistics and transportation partners who have cooperated for more than 10 years, providing door-to-door equipment delivery services.








Transport To Customer Site




Installation And Commissioning


CORINMAC provides on-site installation and commissioning services. We can send professional engineers to your site according to your requirements and train on-site personnel to operate the equipment. We can also provide video installation guidance services.



Installation Steps Guidance Drawing




Company Production Ability




Certificates





Faqs
  • We have never been engaged in mortar production, don't have experience, and do not understand mortar production lines. Can you provide technical and process guidance?
    Yes, we have rich experience in mortar production process and production line technology, and we will customize the production plant according to your needs and provide a full range of project guidance. We can design the Production Line Layout and Site Planning according to the size of your work shop, and provide technical support for mortar formulas.
  • Are you a Factory, a Design company, or a Trading company?
    We are a factory with our own mechanical design engineers and project design engineers, and have a production workshop of 10,000 square meters. 
    We can provide customized solution design according to customer needs, and full-process services such as early project communication, scheme design, equipment selection, equipment production, site planning, equipment layout, transportation and delivery, installation and commissioning.
  • Can I visit your factory?
    Welcome to visit our factory, we can provide you the invitation letter required for visa application. We will meet you at the airport or station and provide professional business reception services.
  • What is the positioning and cost performance of your products?
    We have professional engineers, skilled production workers, high-standardd quality inspection process, and sales and after-sales service teams with barrier-free communication. We can assemble and test all the equipment and pack them carefully before delivery. Maybe our prices is not the lowest, but we are definitely your most suitable and trustworthy partner.
  • What certificates and certifications do you have?
    We have ISO9001 quality management system certification. And we can also provide relevant certification according to the requirements of the customer's country, such as: SGS, EAC certification, etc.
  • Can you produce customized equipment according to our requirements?
    We can produce customized products according to customer needs. The users of the equipment are more aware of the problems in the use of the equipment, so we humbly accept the customer's suggestions and improve the equipment.
  • How long is the delivery time and shipping time?
    According to the production task, the general equipment production period is about 20-30 working days. After the equipment production is completed, you can come to our factory in person, send someone to our factory, or ask we to provide photos and videos of the finished product for inspection.
    The transportation methods include railway, sea, sea-rail combined transportation, etc. The transport time of different countries is different: Southeast Asia: 7-15 days, Central Asia: 20-30 days, Middle East: 20-40 days, Africa & America countries: 30-50 days, Russia and European countries: 25-40 days. We will provide photos and videos of equipment loading throughout the delivery process, as well as official customs clearance information.
  • How long is warranty period, how to guarantee after-sales service, and how to solve equipment quality problems?
    The warranty period of our equipment is 12 months, but it usually takes about 30 days (1 month) to transport from China to the customer's site, and installation and commissioning time also takes about 30 days (1 month). Therefore, our warranty period for foreign customers is extended to 18 months from the date of delivery (except for wearing parts). We will provide customers with necessary wearing parts when delivering the goods. If it is necessary to replace the parts, we will send the parts to the customer's site by air, and all cost will be borne by us.
  • Can engineers be sent to our site for installation and training?
    We can send experienced engineers to the customer's site to guide equipment installation, debug the production line until it is put into production, we will also provide installation instructions, layout drawings, assembly drawings, etc. If the customer has his own engineer, he can install the equipment according to the installation steps drawings we provide, and we can also guide the installtion with online videos.
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

LEAVE US A MESSAGE

Just leave your email or phone number on the contact form so we can serve you.

Attachment:

    Send your inquiry

    Attachment:
      Choose a different language
      English
      Tiếng Việt
      العربية
      Español
      français
      Português
      русский
      简体中文
      Current language:English